|
|
|
| Sliding Bearing ¡ú SF-1W Lead-Free Bush |
 |
| SF-1X Oilless Bush |
Metallurgical structure |
|
|
1.PTFE with lead 0.01~0.03mm
2.Porous bronze 0.2~0.3mm
3.Steel backing 0.7~2.3mm
4.Tin-plating 0.005mm or copper plating 0.008mm |
| Introduction |
| SF-1X is wall wrapped bearing made of triple layer composites material which consists of a steel backing,a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer,It is of low friction cofeeicient,anti-wear,anti-corrosion and can be used without oil,or only a trace of oil os needed.moreover,it is of low cost,low vibration and low noise,compact and light,sf-1Xis widely applied in various sliding articles of different kind of machines,Such as textile machines,tobacoo machines,hydraulic vechicles,antomobiles,agriculture and forests machinese and soon. |
| Technical |
Load capacity£º140N/mm2
Temperature£º-195~+280¡ãC
Speed limit£º5m/s
Friction coef(u)£º0.04~0.20
PV LIMIT(Dry)£º3.6N/mm2 .m/s
PV LIMIT(Oil)£º50N/mm2 .m/s |
| Application£º |
1.Dry or only a trace of grease or oil required maintenance free.
2.Low friction and with long life.
3.Low vibration,low noise and non-pollution in operation.
4.Electroplating is possible to prevent corrosion.It is widely used in various sliding motions of different kind of machine such as textile machine,tobacco machines,hydranlic,vehicles automobiles,agriculture machines and so on.
5.Low stick slip properties ensuring accuracy of machine operation under low sliding speeds.
6.Load will spread over a wider area due to the bearing material's elastic nature.
7.PTFE and Lead film is transferred to the mating shaft to improve running properties.
8.It can be used in low hardness of mating shaft,so the shafts processing is easy.
9.The machine will be compact because of the thin thickness and low weight of the bush. |
SF-1XϵÁÐ ¡¡CHEMICAL CHARACTERISTICS |
| TYPE |
In Air |
In Vacuum |
In water |
In Vapor |
Weak Acid |
middle Acid |
Strong Acid |
In Alkali |
| SF-1X |
OK |
OK |
OK |
OK |
BAD |
NO |
NO |
OK |
|
MMD-10¡¡Friction&Wear Test |
|
| Type |
Time |
Test Condition |
Friction coef(u) |
TEMP.
(¡ãC) |
Wear
(mm) |
| Lubricate |
Speed |
Drang |
| SF-1X |
3hr |
Dry |
0.4m/s |
3.5N/mm2 |
0.139 |
80 |
0.013 |
| SF-1X |
3hr |
Oil |
0.4m/s |
3.5N/mm2 |
0.057 |
52 |
0.012 |
|
|
|
|
|
